User Tools

Site Tools


Sidebar

* [[start]] * [[som|System on module]] * [[usomiq-beaglebone|Mentorel Beaglebone uSomIQ]] * [[usomiq|uSomIQ AM335x]] * [[somiq|SomIQ family]] * [[blueshark|BlueShark family]] * [[devkit|DevKits]] * [[usomiq-bone-cape|uSomIQ Bone Cape]] * [[somiqboard|Somiqboard]] * [[atoll|Atoll]] * [[expansion|Expansion boards]] * [[somiq-wlan|SomIQ-WLAN]] * [[os|OS support]] * [[ubuntu|Ubuntu Linux]] * [[sw-hints|SW hints]] * [[tslib|Tslib]] * [[qt-embedded|Qt embedded]] Follow us * [[http://twitter.com/mentorel|Twitter]] * [[http://www.linkedin.com/company/mentorel|LinkedIn]] * [[https://www.facebook.com/mentorel.company|Facebook]] * [[https://plus.google.com/105868322858146792212/posts|Google+]] * [[http://www.mentorel.com|MENTOREL home page]]

usomiq-tests

uSomIQ Functional Tests Results

These are the results of the functional testing of the uSomIQ module. The SW it was tested by is the default BeagleBone Black Production Image

As the BeagleBone Black platform has eMMC memory and the production image is intended to flash the eMMC it was necessary to disable the emmc-service in Linux because this service led to some unexpected behavior for uSomIQ.

Tests conditions

  1. uSomIQ is connected to uSomIQ Bone Cape v1 baseboard
  2. A wall adapter is used to power the board
  3. For console and debugging used the USB TTL Serial cable TTL-232R-3V3-WE from FTDI
  4. USB host is tested by a USB SD/MMC adapter
  5. Ethernet connector is connected to a 1Gig switch in a local network with access to the Internet

Tests results

Test Result Notes
Console (UART0) yes 115200n8
DDR3 yes default timings for BeagleBone Black
MicroSD yes Boots from uSD
EEPROM (I2C0) yes write works only in u-boot
Ethernet yes pings a global domain name
USB host yes mounts FAT partition
USB OTG yes PC detects uSomIQ
NAND yes u-boot boots from NAND
McASP0 yes Audio cape
LCD yes DVI cape
I2C2 yes cape detection
usomiq-tests.txt · Last modified: 2014/09/29 13:26 (external edit)