MENTOREL Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== uSomIQ Functional Tests Results ======
These are the results of the functional testing of the uSomIQ module. The SW it was tested by is the default BeagleBone Black Production Image

As the BeagleBone Black platform has eMMC memory and the production image is intended to flash the eMMC it was necessary to disable the emmc-service in Linux because this service led to some unexpected behavior for uSomIQ.

===== Tests conditions =====
  - uSomIQ is connected to uSomIQ Bone Cape v1 baseboard
  - A wall adapter is used to power the board
  - For console and debugging used the USB TTL Serial cable TTL-232R-3V3-WE from FTDI
  - USB host is tested by a USB SD/MMC adapter
  - Ethernet connector is connected to a 1Gig switch in a local network with access to the Internet
===== Tests results =====
^ Test ^ Result ^ Notes ^
| Console (UART0) | yes | 115200n8 |
| DDR3 | yes | default timings for BeagleBone Black |
| MicroSD | yes | Boots from uSD |
| EEPROM (I2C0) | yes | write works only in u-boot |
| Ethernet | yes | pings a global domain name |
| USB host | yes | mounts FAT partition |
| USB OTG | yes | PC detects uSomIQ |
| NAND | yes | u-boot boots from NAND |
| McASP0 | yes | Audio cape |
| LCD | yes | DVI cape |
| I2C2 | yes | cape detection |

MENTOREL Wiki

User Tools

Site Tools

Page Tools