User Tools

Site Tools


usomiq-tests

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
usomiq-tests [2013/05/14 11:32]
maxx
usomiq-tests [2014/09/29 13:26] (current)
Line 1: Line 1:
 ====== uSomIQ Functional Tests Results ====== ====== uSomIQ Functional Tests Results ======
-These are the results of the functional testing of the uSomIQ module. The SW it was tested by is the default BeagleBone Black [[http://​dominion.thruhere.net/​koen/angstrom/​beaglebone/​BBB-eMMC-flasher-2013.05.08.img.xz|Production Image 2013.05.08]]+These are the results of the functional testing of the uSomIQ module. The SW it was tested by is the default BeagleBone Black Production Image 
 + 
 +As the BeagleBone Black platform has eMMC memory and the production image is intended to flash the eMMC it was necessary to disable the emmc-service in Linux because this service led to some unexpected behavior for uSomIQ. 
 + 
 +===== Tests conditions ===== 
 +  - uSomIQ is connected to uSomIQ Bone Cape v1 baseboard 
 +  - A wall adapter is used to power the board 
 +  - For console and debugging used the USB TTL Serial cable TTL-232R-3V3-WE from FTDI 
 +  - USB host is tested by a USB SD/MMC adapter 
 +  ​Ethernet connector is connected to a 1Gig switch in a local network with access to the Internet 
 +===== Tests results ===== 
 +^ Test ^ Result ^ Notes ^ 
 +| Console (UART0) | yes | 115200n8 | 
 +| DDR3 | yes | default timings for BeagleBone Black | 
 +| MicroSD | yes | Boots from uSD | 
 +| EEPROM (I2C0) | yes | write works only in u-boot | 
 +| Ethernet | yes | pings a global domain name | 
 +| USB host | yes | mounts FAT partition | 
 +| USB OTG | yes | PC detects uSomIQ | 
 +| NAND | yes | u-boot boots from NAND | 
 +| McASP0 | yes | Audio cape | 
 +| LCD | yes | DVI cape | 
 +| I2C2 | yes | cape detection ​|
  
usomiq-tests.1368545533.txt.gz · Last modified: 2013/05/14 11:32 (external edit)