Differences

This shows you the differences between two versions of the page.

--- usomiq-tests [2013/05/14 11:40]
maxx
+++ usomiq-tests [2014/09/29 13:26] (current)
@@ Line 1: / Line 1: @@
 ====== uSomIQ Functional Tests Results ======
-These are the results of the functional testing of the uSomIQ module. The SW it was tested by is the default BeagleBone Black [[http://dominion.thruhere.net/koen/angstrom/beaglebone/BBB-eMMC-flasher-2013.05.08.img.xz|Production Image 2013.05.08]]
+These are the results of the functional testing of the uSomIQ module. The SW it was tested by is the default BeagleBone Black Production Image
 As the BeagleBone Black platform has eMMC memory and the production image is intended to flash the eMMC it was necessary to disable the emmc-service in Linux because this service led to some unexpected behavior for uSomIQ.
@@ Line 12: / Line 12: @@
 ===== Tests results =====
 ^ Test ^ Result ^ Notes ^
-^ Console | yes | 115200n8 |
+| Console (UART0) | yes | 115200n8 |
+| DDR3 | yes | default timings for BeagleBone Black |
+| MicroSD | yes | Boots from uSD |
+| EEPROM (I2C0) | yes | write works only in u-boot |
+| Ethernet | yes | pings a global domain name |
+| USB host | yes | mounts FAT partition |
+| USB OTG | yes | PC detects uSomIQ |
+| NAND | yes | u-boot boots from NAND |
+| McASP0 | yes | Audio cape |
+| LCD | yes | DVI cape |
+| I2C2 | yes | cape detection |

MENTOREL Wiki