* [[start]] * [[som|System on module]] * [[usomiq-beaglebone|Mentorel Beaglebone uSomIQ]] * [[usomiq|uSomIQ AM335x]] * [[somiq|SomIQ family]] * [[blueshark|BlueShark family]] * [[devkit|DevKits]] * [[usomiq-bone-cape|uSomIQ Bone Cape]] * [[somiqboard|Somiqboard]] * [[atoll|Atoll]] * [[expansion|Expansion boards]] * [[somiq-wlan|SomIQ-WLAN]] * [[os|OS support]] * [[ubuntu|Ubuntu Linux]] * [[sw-hints|SW hints]] * [[tslib|Tslib]] * [[qt-embedded|Qt embedded]] Follow us * [[http://twitter.com/mentorel|Twitter]] * [[http://www.linkedin.com/company/mentorel|LinkedIn]] * [[https://www.facebook.com/mentorel.company|Facebook]] * [[https://plus.google.com/105868322858146792212/posts|Google+]] * [[http://www.mentorel.com|MENTOREL home page]]
Sidebar
usomiq-pins
Table of Contents
uSomIQ mainboard connectors pins
This the description of signals arranged on the uSomIQ side and its connectors P2 and P3. A baseboard connectors will have the same signals but with different numbering. For instance, pin1 of P2 on the module connects to pin2 of the baseboard connector, pin2 of P2 on the module connects to pin4 of the baseboard connector etc.
Table 1. Pins on the P2 connector
| Pin # | Function |
|---|---|
| 1 | 5VDC |
| 2 | GND |
| 3 | 5VDC |
| 4 | GND |
| 5 | 3VDC OUT |
| 6 | 1.8VDC OUT |
| 7 | 3VDC OUT |
| 8 | PWR Button to TPS65217 |
| 9 | I2C0 SDA |
| 10 | ANALOG GND |
| 11 | I2C0 SCL |
| 12 | ADC IN0 |
| 13 | MCASP0_AXR1 |
| 14 | ADC IN1 |
| 15 | MCASP0_ FSR |
| 16 | ADC IN2 |
| 17 | MCASP0_ACLKR |
| 18 | ADC IN3 |
| 19 | MCASP0_AHCLKR |
| 20 | ADC IN4 |
| 21 | MCASP0_AXR0 |
| 22 | ADC IN5 |
| 23 | MCASP0_FSX |
| 24 | ADC IN6 |
| 25 | MCASP0_AHCLKX |
| 26 | ADC IN7 |
| 27 | MCASP0_ACLKX |
| 28 | ANALOG GND |
| 29 | BAT_IN |
| 30 | UART0 RX |
| 31 | BAT_SENSE |
| 32 | UART0 TX |
| 33 | BAT_TS |
| 34 | UART1 RTS |
| 35 | SYS_RESETN |
| 36 | UART1 CTS |
| 37 | GPIO0_20 |
| 38 | UART1 RX |
| 39 | GPIO0_19 |
| 40 | UART1 TX |
| 41 | GND |
| 42 | UART3 RX |
| 43 | DCAN1 RX |
| 44 | UART3 TX |
| 45 | DCAN1 TX |
| 46 | SPI0_D1 |
| 47 | MMC0 DATA3 |
| 48 | SPI0_D0 |
| 49 | MMC0 DATA2 |
| 50 | SPI0 SCLK |
| 51 | MMC0 DATA1 |
| 52 | SPI0 CS0 |
| 53 | MMC0 DATA0 |
| 54 | USB0 VBUS |
| 55 | MMC0 CMD |
| 56 | USB0 DRVBUS |
| 57 | MMC0 CLKO |
| 58 | USB0 ID |
| 59 | GND |
| 60 | GND |
| 61 | ETH RX+ |
| 62 | USB0+ |
| 63 | ETH RX- |
| 64 | USB0- |
| 65 | GND |
| 66 | GND |
| 67 | ETH TX+ |
| 68 | ETH SPEED 100 LED |
| 69 | ETH RX- |
| 70 | ETH ACTIVE LED |
Table 2. Pins on the P3 connector
| Pin # | Function |
|---|---|
| 1 | LCD DATA4 |
| 2 | LCD DATA6 |
| 3 | LCD DATA5 |
| 4 | LCD DATA7 |
| 5 | LCD DATA3 |
| 6 | LCD DATA8 |
| 7 | LCD DATA2 |
| 8 | LCD DATA9 |
| 9 | LCD DATA1 |
| 10 | LCD DATA10 |
| 11 | LCD DATA0 |
| 12 | LCD DATA11 |
| 13 | LCD Data Enable |
| 14 | LCD DATA12 |
| 15 | LCD HSYNC |
| 16 | LCD DATA13 |
| 17 | LCD VSYNC |
| 18 | LCD DATA14 |
| 19 | LCD PCLK |
| 20 | LCD DATA15 |
| 21 | GND |
| 22 | GND |
| 23 | GPMC AD0 |
| 24 | GPMC ALE |
| 25 | GPMC AD1 |
| 26 | GPMC OE |
| 27 | GPMC AD2 |
| 28 | GPMC CS0 |
| 29 | GPMC AD3 |
| 30 | GPMC WE |
| 31 | GPMC AD4 |
| 32 | GPMC CLE |
| 33 | GPMC AD5 |
| 34 | GPMC CS3 |
| 35 | GPMC AD6 |
| 36 | GPMC CS2 |
| 37 | GPMC AD7 |
| 38 | GPMC CS1 |
| 39 | GPMC AD8 |
| 40 | GPMC CLK |
| 41 | GPMC AD9 |
| 42 | GPMC AD11 |
| 43 | GPMC AD10 |
| 44 | GPMC AD12 |
| 45 | GPMC AD14 |
| 46 | GPMC AD13 |
| 47 | GPMC AD15 |
| 48 | GPMC A0 |
| 49 | GPMC A6 |
| 50 | GPMC A1 |
| 51 | GPMC A7 |
| 52 | GPMC A2 |
| 53 | GPMC A8 |
| 54 | GPMC A3 |
| 55 | GPMC A9 |
| 56 | GPMC A4 |
| 57 | GPMC A10 |
| 58 | GPMC A5 |
| 59 | GPMC A11 |
| 60 | GND |
| 61 | GPMC WP |
| 62 | USB1 VBUS |
| 63 | GPMC WAIT |
| 64 | USB1 DRVVBUS |
| 65 | GPMC BE1 |
| 66 | GND |
| 67 | nc |
| 68 | USB1+ |
| 69 | nc |
| 70 | USB1- |
usomiq-pins.txt · Last modified: 2014/10/01 02:03 by maxx
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
