MENTOREL Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== uSomIQ Functional Tests Results ======
These are the results of the functional testing of the uSomIQ module. The SW it was tested by is the default BeagleBone Black [[http://dominion.thruhere.net/koen/angstrom/beaglebone/BBB-eMMC-flasher-2013.05.08.img.xz|Production Image 2013.05.08]]

As the BeagleBone Black platform has eMMC memory and the production image is intended to flash the eMMC it was necessary to disable the emmc-service in Linux because this service led to some unexpected behavior for uSomIQ.

===== Tests conditions =====
  - uSomIQ is connected to uSomIQ Bone Cape v1 baseboard
  - A wall adapter is used to power the board
  - For console and debugging used the USB TTL Serial cable TTL-232R-3V3-WE from FTDI
  - USB host is tested by a USB SD/MMC adapter
  - Ethernet connector is connected to a 1Gig switch in a local network with access to the Internet
===== Tests results =====
^ Test ^ Result ^ Notes ^
| Console (UART0) | yes | 115200n8 |
| DDR3 | yes | default timings for BeagleBone Black |
| MicroSD | yes | Boots from uSD |
| EEPROM (I2C0) | yes | write works only in u-boot |
| Ethernet | yes | pings a global domain name |
| USB host | yes | mounts FAT partition |
| USB OTG | not tested | |
| NAND | yes | |
| McASP0 | yes | Audio cape |
| LCD | yes | DVI cape |
| I2C2 | yes | cape detection |

MENTOREL Wiki

User Tools

Site Tools

Page Tools